Intel Alder Lake H670, B660 and H310 motherboard specifications revealed

Let's begin with the H670 chipset, which sits one step below Z690. Most of the core functionality remains the same, including DDR4 and DDR5 support. The H670 chipset lacks the ability to overclock the CPU, which is difficult anyway unless you have very good cooling. Thankfully, H670 retains the ability to overclock the memory. The DMI link remains at 8x, meaning it will be possible for manufacturers to make H670 boards with up to four or five M.2 slots.To get more latest news on intel, you can visit shine news official website.

The USB count is the disappointing part as the H670’s USB 3.0 count is lacking compared to Z690. Of course, thanks to a high number of chipset PCIe lanes, board manufacturers are free to include auxiliary USB controllers. Some H670 boards are likely to be priced at pretty steep levels making them strong entry/mid range Z690 competitors.
B660 is the chipset that most DIY’ers on a budget will look at. Compared to Z690 it loses the ability to overclock the CPU, while retaining memory OC capabilities. It includes only one PCIe 5.0 slot, which at this point in time means very little—it's possible PCIe 5.0 support will be optional or limited to high end models. The DMI link drops to 4x, half that of Z690 and H670, so board makers are unlikely to include more than two or three M.2 slots. The USB count drops only a little from H670.

B660 looks like it has a set of specs that the majority of the market will find perfectly adequate. You can run a fast CPU like the Core i5 12600K and any GPU you wish along with a fast NVMe SSD or two and some HDDs for storage. B460 and earlier boards lost a good chunk of performance when stuck with DDR4-2666. Luckily locked memory is a thing of the past.

We can expect to see high end B660 boards cost more than their entry level Z690 counterparts, especially those that include a strong VRM, good heatsinks and Wi-Fi 6E. Some B660 boards should end up offering a well balanced core feature set and good bang for buck.

H610 looks to be very much entry level. There’s still a PCIe 5.0 slot which is surprising, along with DDR5 support too, but curiously, there's no PCIe 4.0 at all so your NVMe SSD will operate at PCIe 3.0 only. It dramatically cuts down on the amount of expansion potential, with just eight chipset PCIe 3.0 lanes in total. There’s also a low USB 3.0 count. Still, H610 boards are designed to be cheap and as long as the VRMs are not heatsink-less junk, they’ll be able to do a job in an entry level systems when paired with the likes of an i3 CPU such as the Core i3 12100. You can forget about running a 12900K in one of these boards even if they officially include support.

It's certainly good to hear of cheaper 12th Gen compatible boards. Z690 rather shocked us with its high pricing—part of it is pandemic and component shortage related, but some pricing is surely opportunistic. Let’s hope that H and B series boards will end up with a better price/feature balance, with decent stocks on shelves as well.